$9.99 - $11.99
Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)
$113.00 - $124.00
With optimized crankarms made from 6061-series aluminum, SRAM's X5 Crankset is stiff, tough and ready to take on the mountain. Its 7075-aluminum X-Glide chainrings have multiple shift points designed for snappy, super-fast shifts up and down and the 44/32/22T gearing gives you plenty of range.
$46.00 - $199.99
- 42x30x7mm BB30 cartridge bearings housed in a press-fit, composite sleeve assembly for use with a BB386EVO or BB30 crankset in a BB386EVO or Press-Fit 30 (PF30) frame - Road sets include bearings, shields and a wavy washer - Mountain sets include bearings, shields and a spacer - Choose ceramic or stainless steel options
Secure your chainrings for your ride with Origin-8's Double/Triple Chainring Bolts. Made for inner triple chainrings, each set includes 5 male bolts to securly connect your chainrings to your crank.
Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips! Compatible with: - Race Face - Next SL Cinch (G3) - Sixc Cinch - Chester - Respond - Next/Next SL (24mm Spindle) - Sixc (24mm Spindle) - Most other popular carbon MTB cranks and assorted alloy DH cranks
- Chainring bolt sets are available in sets of four or five - Bolts have 5mm hex heads - Inner Length: M8x7.5mm Bolt (x4) / M8x7mm Nut (x4) - Material: Steel - Type: 1x
• Singlespeed crankset • Forged alloy crank arms • Square taper interface • Does not include BB • 42-tooth chainring • Double chainring guard • Bolt Pattern: 104 x 4-bolt • 670 grams
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly in tact. - Injection molded plastic crank arm protection - Perfect way to protect your carbon crank investment from scratches and dents from pedal strikes - Material: Injection molded plastic - Recommended Group: XX1, X01, XX, X0
For maximum pedaling efficiency, Shimano's 105 Crankset boasts light, stiff hollow cold forged aluminum arms, plus an integrated oversize-steel axle. The chainrings are also made of cold-forged aluminum and are ramped and pinned for quick, precise shifting. The asymmetrical, four-armed big chainring provides incredible power transfer.
$151.00 - $197.00
SRAM's Rival 22 performs on par with more expensive cranksets, but at a bargain value. The crankarms are hollow and forged from 6066 aluminum for maximum strength with minimum weight. Because lightness is nothing without toughness, the Rival crankset proudly boasts SRAM's X Glide R chainrings that are specifically designed for use with the Yaw front derailleur. Durability and reliable shifting are your allies with Rival 22.
$130.00 - $140.00
SRAM's Apex Crankset is designed for capable stiffness at an impressive weight. The cold-forged aluminum arms are tough, rigid and perfectly complement your favorite ride. SRAM's long-lasting Powerglide chainrings are hard anodized and designed for quick, positive shifting in all conditions. Plus, the Apex crankset comes with SRAM's smooth-spinning GXP bottom bracket.
Race Face Chain Retention System Parts • For use with English threaded bottom bracket shells with no ISCG mount tabs
$10.99 - $23.99
Revamp the look of your single speed cranks with some new hardware. Origin-8's Single Chainring Bolts give a high polished look to any crankset. The anodized finish comes in multiple colors to highlight your crank and makes it look as good as you do. You can also choose between steel or aluminum bolts. • Set of 5 male/female bolts • Inside measures 4mm when tightened, 7mm total height
$74.00 - $101.00
The SRAM SX Eagle Crankset includes Eagle platform styling and features at an entry-level price point. SX Eagle cranks are compatible with all levels with SRAM Eagle drivetrain systems. - Offers the same chain retention performance as seen in all higher-level Eagle drivetrain cranks - 32T direct mount X-SYNC 2 steel chainring included - Aluminum crank arms - 11/12-speed compatible - Bottom bracket sold separately
$12.95 - $15.99
- Lower slider replacement parts for E-13 chainguides
$157.99 - $166.99
The Shimano 105 double crankset balances weight and efficiency without sacrificing stiffness. It offers Rider Tuned performance with numerous gear combinations, and the wider gear pitch increases chain clearance with small gearings and allows for as short as 410mm chain stays. - Hollowtech II construction - 11-speed - 110mm Shimano Asymmetric BCD
- Steel chainring with forged alloy crank arms and double chainguard - Compatible with 3/32" chains - 45mm chainline - Spindle Type: 118 SQR JIS
$25.99 - $36.99
- Horizontal square interface - Only includes left crank
Shimano's CX50 Crankset features lightweight, hollow-forged aluminum arms and two-piece construction for high-efficiency power transfer to get you through the mud and on the podium. The 36/46 chainring setup is a 'cross friendly combination, and Shimano's wide pitch crank design eliminates chain rub in cross-gear situations. SG-X chainrings boast the shift-at-will performance Shimano is known for.
An integral part of the Shimano Ultegra 12-speed road lineup, the FC-R8100 crankset builds upon Shimano's legendary front shifting and transmission efficiency. With new refinements for seamless 12-speed shifting, the Ultegra crank is now offered in a wide variety of lengths, bringing performance and improved fit for smaller riders, triathletes, and riders with specific biomechanic requirements. - Optimal balance of stiffness, strength, weight and rotational performance - Hollowglide structure cuts weight yet maintains strength for better power transfer and quicker, more precise front shifting - 148mm Q-factor - 44.5mm chainline
Shimano's new FC-RX810-2 crank balances weight and efficiency for mixed-terrain riding. Gearing options cater for the specific demands of gravel riding and to maintain tighter gear steps for maintaining pedaling rhythm. The 2x11-speed crank is available in a 48-31T, 40T, and 42T chainring combination and 170, 172.5, and 175mm crank arm lengths. - Gravel gear ratios preserve riding rhythm over rough surfaces with wider tires - Optimum gearing for mixed terrains and riding styles - Wide-range double - Gear combinations: 48-31T, 40T, 42T
$36.99 - $44.99
Shimano Altus M311 cranksets provide durability and reliable shifting for triple chainring drivetrains. - Hyperdrive SG-X chainrings - 7/8-speed compatible - Spindle interface type: Square Taper JIS
$51.99 - $59.99
Shimano Acera FC-M361 cranksets feature sturdy construction, reliable shifting, and replaceable chainrings. - Spindle Interface type: Square Taper JIS
Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. It's invisible technology that adds minimal weight and will help you get to the finish line faster, and it can be used to upgrade any eTap AXS bike. - An elegant, integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - Simple and affordable power meter upgrade option - Right Arm/BB/Spider/Chainrings NOT INCLUDED
$18.99 - $24.99
• Square taper interface • Only includes left crank
- Service parts for E-13 chainguides
The Race Face Aeffect crank is designed to handle aggressive trail riding at XC crank weight and an attractive price point. Features the CINCH system with its interchangeable spider options and a 24mm EXI interface spindle. - Crank arms forged from 6066 aluminum - Compatible with all CINCH direct mount rings and spiders to easily convert between existing chainring standards - Compatible with direct mount, 1x, 2x with - and without bash, and 3x configurations - 24mm EXI spindle compatible with Race Face X-Type bottom brackets or Hollowtech II compatible bottom brackets - CINCH removable spiders and direct mount rings utilize a 20-tooth ISIS cup BB tool for removal and installation - Bottom bracket sold separately
- Replacement bolt for DUB cranks
$7.99 - $21.99
Secure your chainrings for your ride with Origin-8's Double/Triple Chainring Bolts. Made for double and triple chainrings, each set includes 5 male/female bolts to securely connect your chain rings to the crank. Available in black and silver, as well as aluminum or steel.
The XX1 Eagle DUB crankset has been re-examined and re-engineered. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility, and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Carbon-tuned lay-up crank design provides extreme stiffness and light weight - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Boost Compatible - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 141/148 Boost Hubs
Page 1 of 2 Next page