Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Tools

$31.99
- The crank puller is designed to remove standard square spindle cranks. With help of the included adaptor other standards such as ISIS and Octalink cranks can also be removed.
$6.99 - $13.99
Material: premium chrome vanadium steel
$11.99
- Blade chrome plated, black anodised tip - Handle – polypropylene
$46.99
- 3/32" chain whip
$11.99
- 15 mm opening is laser cut with precision and perfect angle to help you loosen the pedals as easy as possible - 270mm of length for extra leverage - Small and light weight, perfect for toolbox and traveling
$12.99
The wrench is used for tightening and unscrewing screws with 2, 2.5, and 3mm hex-shaped nuts.
$9.99
- Pedal thread inserts are used to replace damaged threads in cranks
$24.99
- Master link pliers are for commonly used chains with master link, SRAM Powerlink or the KMC Missing Link
$38.99
Two 15 mm openings set at offset angles to easily remove pedals regardless of the pedal axle position
$24.99
Spoke wrenches are designed to tighten nipples with flat diameter 3.3mm to 3.45mm.
$12.99
Three most popular TORX sizes: T10, T15 and T25mm
$38.99
- Quickly and accurately determine the wear and stretch of any chain
$34.99
- The wrench is used to remove and install Shimano Hollowtech II, Campagnolo Ultra-Torque and Power Torque, Race Face, FSA, SRAM, Truvativ, Chris King bottom brackets - Small wrench is included for removal and installation of Shimano plastic bolts that are used on the Hollowtech II cranksets - Material: premium flex plus carbon steel, Surface finish: chrome plated according to ISO1456:2009
$10.99
- Shimano, SRAM, Sun Tour, Chris King and Sun Race and others.
$9.99
For use in conjunction with our reaming pedal taps, this thread insert is held in place with a strong thread locker and allows you to install any standard pedal. - Pack of 10, fits 9/16" pedals.
$12.99
- The wrench is used for tightening and unscrewing screws with 4, 5, and 6mm hex-shaped nut
$44.99
- Pliers developed specially for cutting shift and break housing. Pliers cut precise and smooth without deformation to the cable housing and feature a build in crimping function for cable end caps. - In order to preserve the ultimate cutting performance, we highly advice not to use pliers for cutting shift/brake wires and spokes.
$129.99
- Foldable and precise tool, used for re-aligning rear derailleur hangers and maintaining precise gear shifting - Compatible with all wheel sizes from 20? to 29?+ and screws directly into rear derailleur hanger threads - Precise measuring gauge can be locked in place, so you don´t lose you measurement when you push it against the wheel in different positions
$22.99
- These 12" blades are compatible with the Unior hacksaw frame and come in a pack of 2 - Much safer for cutting carbon as it leads to fewer loose strands and leaves a cleaner result
Page 1 of 1